AX Rubber V-Belt, Raw Edge/ Cogged Size From AX 19 Inch To AX 61 Inch
-
Payment
-
Origin
China Mainland
-
Minimum Order
5
-
Packing
Pieces
- Contact Now Start Order
- Description
Product Detail
The upper and lower part of the cut-edged belt is covered by wrapping cloth, and rubber is shown at the flank. To improve flexural property, v-belt with tooth-type groove is equipped on the lower layer.
General cutting V-belt is characterized by large friction coefficient, small bending loss, and high transmission power. It is capable of absorbing transmission and vibration noise and exhibits fatigue resistance of over 10 times, thus having a long service life.
Product features1. Belt Angle is approximately 40 degrees 2. The belts are constructed of highly engineered and high performance components 3. The helically wound tensile cords are specially engineered, twisted, heat and chemically set and polyester material |
Product description
Raw edge notched V-belts give premium belt performance. The belts are constructed of highly engineered, high performance components. The components are made using the latest in belt technology available on a global basis. The “X” in the part number refers to higher load ratings than standard wrapped belts The lower, compression section of the belt is made of highly fiber reinforced, oil and heat resistant, engineered synthetic rubber compound, specifically compounded for excellent wear resistance, cool running, flexibility and has been proven through thousands of hours of testing. The rubber directly surrounding the tensile member cables is also fiber reinforced and compounded for great adhesion to the tensile member cords. The top fabric is a specially woven, synthetic-natural fiber blend. The notches are engineered to allow the belts to have superior flex characteristics on smaller and larger diameter pulleys. The helically wound tensile cords are specially engineered, twisted, heat and chemically set, polyester material.
- B Mode Ordinary V Belt Top Width 17MM Height 11mm 5 Pieces / (Min. Order)
- Cogged V-BELT Size From 25 Inch To 300 Inch Natural Rubber 5 Pieces / (Min. Order)
- Wrapped V-belt A710mm Natural Rubber Size From A18 Inch To A67 Inch 5 Pieces / (Min. Order)
- Wrapped V-belt A710MM Section Natural Rubber Size From A 18 Inch To A 67 Inch 5 Pieces / (Min. Order)
- A Mode Industrial V Belt Size From A18inch To A180inch 5 Pieces / (Min. Order)
- Industrial B 25-92 V-Force Wrapped V-Belt The Width 17 Mm And The Height 11 Mm 5 Pieces / (Min. Order)
- C Mode Wash machine V Belt Supplier Top Width 22 mm Height 14 mm Size from C38 Inch to C480 Inch 1 Pieces / (Min. Order)
- B Section Pulley V Belt Drive Belt Top Width 17MM Height 11mm Size from B25 Inch to B472 Inch 1 Pieces / (Min. Order)
- Ordinary Wrapped V Belt Size from A18 Inch to A180 Inch top Width 13mm Height 8mm 1 Pieces / (Min. Order)